 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2SA1862 Transistors High-voltage Switching Transistor (-400V, -2A) 2SA1862 Features 1) High breakdown voltage. (BVCEO = -400V) 2) Low saturation voltage. (Max. VCE (sat) = -0.5V at IC / IB = -500mA / -100mA) 3) High switching speed, typically tf = 0.4s at IC = -1A. 4) Wide SOA (safe operating area). External dimensions (Unit : mm) CPT3 6.5 5.1 2.3 0.5 5.5 1.5 0.9 0.75 Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation Junction temperature Storage temperature Single pulse, Pw=10ms Symbol VCBO VCEO VEBO IC PC Tj Tstg Limits -400 -400 -7 -2 -4 1 10 150 -55 to +150 Unit V V V A (DC) A (Pulse) W W (Tc=25C) 0.9 2.3 (2) (3) (1)Base (Gate) (2)Collector (Drain) (3)Emitter (Source) (1) 2.3 0.8Min. 0.5 1.0 Absolute maximum ratings (Ta=25C) 0.65 Abbreviated symbol : A1862 C C Packaging specifications and hFE Type Package hFE Code Basic ordering unit (pieces) 2SA1862 CPT3 P TL 2500 Electrical characteristics (Ta=25C) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage Base-emitter saturation voltage DC current transfer ratio Transition frequency Output capacitance Turn-on time Storage time Fall time Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) VBE(sat) hFE fT Cob ton tstg tf Min. -400 -400 -7 - - - - 82 - - - - - Typ. - - - - - - - - 18 30 0.2 1.8 0.4 Max. - - - -10 -10 -0.5 -1.2 180 - - - - - Unit V V V A A V V - MHz pF s s s IC= -50A IC= -1mA IE= -50A VCB= -400V VEB= -5V IC/IB= -0.5A/ -0.1A IC/IB= -0.5A/ -0.1A VCE= -5V, IC= -0.1A VCB= -10V, IE=0.1A, f=5MHz VCE= -10V, IE=0A, f=1MHz IC=-1A, RL=150 IB1=-IB2= -0.2A VCC Conditions -150V Rev.B 2.5 1.5 9.5 1/2 2SA1862 Transistors Electrical characteristic curves -0.5 Ta=25C COLLECTOR CURRENT : IC (A) DC CURRENT GAIN : hEF -0.4 COLLECTOR CURRENT : IC (mA) -5.0mA -4.5mA -4.0mA -3.5mA -3.0mA -2.5mA -2.0mA -1.5mA -1.0mA -10 -5 -2 -1 -0.5 -0.2 -0.1 -0.05 -0.02 -0.01 -0.005 -0.002 -0.001 0 Ta=25C VCE= -5V 1000 500 200 100 50 20 10 5 2 Ta=25C VCE= -5V -0.3 -0.2 -0.1 IB= -0.5mA 0 0 -2 -4 -6 -8 -10 -0.2 -0.4 -0.6 -0.8 -1.0 -1.2 -1.4 1 -0.001 -0.002 -0.005 -0.01 -0.02 -0.05 -0.1 -0.2 -0.5 -1 -2 -5 -10 COLLECTOR TO EMITTER VOLTAGE : VCE (V) BASE TO EMITTER VOLTAGE : VBE (V) COLLECTOR CURRENT : IC (A) Fig.1 Ground emitter output characteristics Fig.2 Grounded emitter propagation characteristics Fig.3 DC current gain vs. collector current COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) BASE SAURATION VLTAGE : VBE(sat) (V) COLLECTOR OUTPUT SATURATION : Cob (pF) EMITTER INPUT CAPACITANCE : Cib (pF) TRANSITION FREQUENCY : fT (MHz) -10 Ta=25C -5 IC/IB=5 -2 -1 -0.5 -0.2 -0.1 -0.05 -0.02 -0.01 -0.001 -0.002 -0.005 -0.01 -0.02 -0.05 -0.1 -0.2 -0.5 -1 -2 -5 -10 1000 500 200 100 50 20 10 5 2 1 0.001 0.002 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 Ta=25C VCE= -10V 10000 5000 2000 1000 500 Ta=25C f=1MHz IE=0A VBE(sat) Cib 200 100 50 20 10 -0.1 -0.2 -0.5 -1 -2 -5 -10 -20 -50 -100 Cob VCE(sat) 2 5 10 COLLECTOR CURRENT : IC (A) EMITTER CURRENT : IE (A) COLLECTOR TO BASE VOLTAGE : VCB (V) EMITTER TO BASE VOLTAGE : VEB (V) Fig.4 Collector-emitter saturation voltage vs. collector current Base-emitter saturation voltage vs. collector current Fig.5 Gain bandwidth product vs. emitter current Fig.6 Collector output capacitance vs. collector-bass voltage Emitter input capacitance vs. emitter-base voltage COLLECTOR CURRENT : IC (A) -10 -5 -2 -1 -0.5 -0.2 -0.1 -0.05 -0.02 -0.01 -1 TRANSIENT THERMAL RESISTENCE : Rth (C/W) 10000 1000 IC Max.(Pulse) Pw=10ms (1)Using infinite heat sink (2)Unmounted (2) DC 100 100ms (1) 10 1 0.1 0.01 0.001 Tc=25C Single nonrepetitive pulse -2 -5 -10 -20 -50 -100 -200 -500 -1000 0.01 0.1 1 10 100 1000 COLLECTOR TO EMITTER VOLTAGE : VCE (V) TIME : t (s) Fig.7 Safe operating area Fig.8 Transient thermal resistance Rev.B 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of 2SA18621
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |